Alternative Solutions to Change of Google Corporation Essay

Alternative Solutions to Change of Google Corporation - Essay Example In 2004 a company that was already millions of dollars in revenue decided to go public to spur the company long-term growth potential. The Google IPO on April 30, 2004, raised $2.7 billion dollars (Monica, 2004). Today Google is the market leader in search engine industry with a 50% market share and also controls 70% of all internet based advertising revenue. During the 3rd quarter of 2008 Google generated $5.54 billion dollars in revenues (Google, 2008). Â  Google handle half the traffic over the internet today. Its information system has access to nearly 25 billion web pages. The information technology (IT) infrastructure the company utilizes is composed of 450,000 inexpensive servers spread around 25 nations worldwide. The system is very cost effective because not only is the company achieving cost savings in hardware, the software utilized to program the servers is a customized version of the freeware Linux operating system. Google’s superior MIS design provides the company a 3 to 1 cost advantage in comparison with its competitor in order to achieve a comparable computing power. There are three key software applications that optimize the efficiency of the system. The MapReduce software system provides a programming model that simplifies processing. The WorkQueue system allows grouping of queries and schedules to perform distributed processing, while the Google File System serves the function of safe proofing the data by k eeping copies of the data in several places to prevent loss of information in case part of the system crashes. Â  Google has excelled in the online advertisement industry. Google has a technology that creates a correlation between the contents of a page and the potential advertisers. The technology creates online ad campaigns that are more relevant than the competitors can provide.

HW Assignment Example | Topics and Well Written Essays - 250 words

HW - Assignment Example Kodak has a legal obligation to sue companies that infringe on its patents. Kodak is among the oldest companies in the market that is slowly dying. Patents give the company to exclusively benefit from its innovations. Kodak sues the companies’ infringing on its patents to be compensated for its products. The company has to sue to deter other companies from infringing on its patents. Kodak has an exclusive right to produce the product for 20 years before other companies can duplicate. The company sues to ensure that it retains this right. Kodak can market its products in the market to gain market dominance before its patents expire. The company should invest in market penetration to ensure that it attains a loyal client base before the 20-year patent period. The company can also diversify it product range to compete with other players in the market. Positioning is key for the company, the management should ensure that the company is well positioned in the

Art Education Essay Example | Topics and Well Written Essays - 750 words - 1

Art Education - Essay Example Dancing is another form of art which emphasizes on the movement of the body in rhythm to the music. Dancing is used for expression of emotions, energy release, and being joyful of the movement itself. Riitta Pasanen Willberg introduces somatic choreography approach in relating the ideas of dancers with their choreographers on performances. Her aim is to evaluate the effectiveness of the exercises on the dancers in order to assess if the goals of the choreography were attained. Somatic practices are intended to raise kinesthetic awareness and to listen to one’s physical sensations, unlike just focusing on the visual view, imitation, and repetition of movements. Theatre Arts is a form of art wherein the actions of the body particularly facial expressions and human voices are used by performers in interpreting and creating drama in a story. It uses several elements like the architecture, lighting, stage craft, and sound design. John William Sommers argues that theatre can stimulate changes in art, a belief that is contradictory to U.S. Cornerstone Theatre Company Artistic Director Bill Rauch’s idea that one cannot predict art changes. He introduces the term Applied Drama which involves an application of direct experiences to create changes. In his study, he concludes that change is possible through the creation of situations in which people will experience favorable conditions where changes in values, knowledge, and attitudes can happen. Visual Arts is another form of art which focuses on presentations that are seen and appreciated by the naked eye. These presentations are in the form of paintings, sculptures, collages, etc. Terrence McCraw discusses about the distinction of arts from crafts. He provides one instance that explains the distinction. It was during the Reformation where embroidery became popular with more focus on the different designs. McCraw cites that the embroidery production created shared features with arts and crafts which made them similar. However according to him, the connotations of crafts in the modern period are still present in the embroidery works that were produced domestically which makes the point above confusing. III. RECOMMENDATION For music, the studies on musical therapy and the effects of music on the human brain function are significant topics that can be discussed and expounded in art education. For dancing, the study of somatics is also an interesting mechanism for effective body movement and coordination. In theatre arts the notion of Applied Drama is an essential tool for art change for versatility. Lastly, the distinction of arts from crafts is a good topic for debate when understanding the nature of art and its disciplines.

Metropolis Movie Essay Example | Topics and Well Written Essays - 1250 words

Metropolis Movie - Essay Example It was quite popular and among one of a kind movie to ever grace theatres and cinemas. Fritz Lang was a master of expressionism in German. This shows why he adopted and directed such an ambitious and eye catching movie to air in the 1920s. He adopts a futuristic dystopia that has two distinct approaches. The distinct classes are that of workers and thinkers. The movie depicts struggles between the two conflicting entities. It incorporates symbolism to a large extent. That said, the sci-fi perspective that is shown in this movie does not come close to defining reality. The fact that it was set in 1927 makes it seem eerily near reality. This is one of the many distinctive features with the movies of current times. However, the blame does not fall on Fritz as the provisions of that time only possessed the characteristics that feature in the movie. It is a good trial to depict reality. The visual impressions created are laudable though there is a considerable change and advancement of th e same since 1927. The movie is credited as having taken up a large amount of resources to make. In fact, it was the biggest budgeted movie in Germany during that time. There is a critic on the issue of budgeting. The movie was shot for a period of 310 days (close to a year) with an unmatched production design and members of the cast summing up to 36,000 extras. This is the reason why a huge amount of money was used up in its production. The amount spent on this movie translates to a better visually and acting equipped movie in current times. There is no denying that acquisition of the provisions that facilitated production of metropolis at that time was an expensive endeavor. There has been progress in the budgeting of movies of the same kind such as metropolis. They are not as demanding and the provisions are readily available. The movie world has instituted favorable technologies to oversee the production of science fiction movies. Similarly, the movie world has developed ways to manage the number of cast involved in the –production. Current science fiction movies certainly do not use such a huge number of extra casts. This means that production of such a movie in recent times is not a pioneering practice as in the case of metropolis. The cast are continuously being reduced to a manageable level and the rest of the cast requirement facilitated by technological features. Therefore, cost effectiveness in production of science fiction movies has been noticed over time since 1927(Lopate 22). . The movies possess a commendable attribute of linking science fiction with common and existing phenomena. This attribute is not common with movies of such kind in current times. The movie captures the conflicts of two groups. The workers are depicted as mentally exhausted and submissive. They walk in crowds creating the impression that they can be easily deceived. The masses are portrayed as incapable of challenging for anything. This description of the masses by F ritz Lang, coincidences with the notion created by leaders of that time. For instance, Hitler is quoted as saying â€Å"How fortunate for leaders that men do not think†. Other politicians also viewed the description as worth accreditation. This is a physically approved attribute that assures the movie plot is quite relevant to the social and political settings of that time. However, this does not mean that current science fic

Classification and division Essay Example | Topics and Well Written Essays - 500 words

Classification and division - Essay Example Thus schools are classified mainly into three broad categories; Elementary school, middle school and high school, for educating the children of different ages in a proper manner. Elementary schools are institutions in which children get their initial education. It is also referred as primary schools in some parts of the world. Elementary education includes kindergarten education or pre-primary education and primary education. Children within the age group of 3-11 are usually admitted in the elementary schools. Story telling methods are usually adopted in elementary teaching because of the interests of elementary school children in hearing stories. Problem solving or analytical methods cannot be applied in elementary school stages because of the difficulty of small aged children in grasping topics through such methods. Elementary education usually ends in the fifth standard. At the end of elementary education, middle school education starts. Middle schools are institutions in which th e children of 11 to 14 years old undergo the learning process. Usually, education from grade sixth to eighth is included in middle schools. â€Å"Young people undergo more rapid and profound personal changes between the ages 10 and 15 than at any other time in their lives.

Building Positive Relationships in Children Essay Example for Free

Building Positive Relationships in Children Essay To help your child understand feelings you could do a feeling chart or make a feeling tree in your home. To make a feelings chart just draw out faces with how there expression might be when they are feeling that way an do the expressions yourself when showing them. This will give your child a better understanding of their feelings and how they can express them through facial expressions. For a feeling tree its much the same idea as a feeling card but you just take in a branch from a tree and stick the faces with the expressions on it. this will help a child express themselves when they can’t do it through facial expressions. The Significance of friendship Buy them some books with plenty of colourful pictures with the theme of friendship and them to them.this will help show them how nice it is to have friends and how to make them and keep them. It is only after the age of three that children can incorperate other children into their playtime activities so at around this age ask other parents if they would like to make a playdate for their child and yours n a regular basis.this will get your child used to other childrens company.you can also talk about what they did together at dinner or quiet time alone and encourage them to do it again. Communication and Respect To help your child with communication you need to be a good example to them.talk to them as much as you can about your day and ask how theirs was.even talking about their favourite tv programme would be good as they will be more likely to talk about something that they’re interested in. To teach them about respect you need to set a good example for this as well. Giving them boundaries will also help and treating them with respect will encourage them to do the same to you. Factors that impact/Motivate children Tou tourself have a major impact on your child.they learn from how you react to situations and other peaople and will use this as a guide for themselves. Also the tv programmes that they watch will make an impact on them and can also motivate them to try new things that they wouldn’t of thought of themselves. .

Introduction To Cricket In The 21st Century History Essay

Introduction To Cricket In The 21st Century History Essay When considering the extensive amount of research that has been directed toward the sporting world from a mathematical, statistical and operational research perspective, the Duckworth/Lewis method (Duckworth and Lewis, 1998, 2004) perhaps stands alone as the most significant contribution to sport. The common practice in dealing with interrupted one-day cricket matches until 1992 was to compare the run rates (the total number of runs scored divided by the number of completed overs) of the competing teams; the team with the higher run rate was declared the winner. However, this rule tended to benefit the team batting second (Team 2) at the expense of the team batting first (Team 1), leading to the common practice of inviting the other team to bat first if rain was expected. The difficulty with run rates is that targets are determined by taking the remaining overs into account, while ignoring the number of lost wickets. As is well known, batsmen tend to bat less aggressively and score fewer runs when more wickets have been taken. The first team does not have the same strategic options as the second team and, in that sense, the rule does not provide both teams with equal opportunities. Realising that this rule is biased towards the side batting second, the Australian Cricket Board introduced its most productive overs rule during the 1992/93 season. This rule calculates the target for Team 2 by taking the n highest scoring overs of Team 1 where n is the number of played overs (for example, 40 if 10 overs are lost due to rain). Ironically, this rule was now considered as tending to favour the side batting first and transparently unfair to the team batting second. To illustrate, Suppose that Team 2 requires 20 off 19 balls to win, when a short shower takes three overs away. The reset target would now be 20 off 1 ball since the three least productive overs are deduced from the original target (which we may believe were three maiden overs in this case). However, this seems to be unfair and even ironic: the second teams excellent bowling (three maiden overs) in the first innings is now turning against them; it would have been better for Team 2 in this case if Team 1 had reached the same total score without any maidens. The Duckworth/Lewis method was utilised and gained prominence during the 1999 World Cup, and since that time, it has been adopted by every major cricketing board and competition. In one-day cricket, the Duckworth/Lewis method is based on the recognition that at the beginning of a match, each side has resources available (typically 50 overs and 10 wickets). When the match is shortened, the resources of one or both teams are reduced and the two teams usually have different resources for their innings. In this case, in an attempt to be fair, a revised target for the team batting second is set. The determination of the target using resources is known as the Duckworth/Lewis method. What makes the adoption of the Duckworth/Lewis method remarkable is that the method is widely perceived by the public as a black box procedure. Generally, people do not understand how the targets are set but they do agree that the targets are sensible or at least preferable to the approach based on run rates. Although the Duckworth/Lewis (D/L) method was designed for one-day cricket, it has also been applied to Twenty20 cricket. Twenty20 is a relatively new version of limited overs cricket with only 20 overs per side. In contrast to the one-day game and first-class cricket (which can take up to five days to complete), Twenty20 matches have completion times that are comparable to other popular team sports. With the introduction of the biennial World Twenty20 tournament in 2007 and the Indian Premier League in 2008, Twenty20 cricket has gained widespread popularity. Although Twenty20 (t20) cricket is similar to one-day cricket, there exist subtle variations in the rules (e.g. fielding restrictions, limits on bowling, etc) between the two versions of cricket. The variations in the rules, and most importantly, the reduction of overs from 50 to 20 suggest that scoring patterns in t20 may differ from the one-day game. In particular, t20 is seen as a more explosive game where the ability to score 4s and 6s is more highly valued than in one-day cricket. Since the D/L method (and its associated resource table) is based on the scoring patterns in one-day cricket, it is therefore reasonable to ask whether the D-L method is appropriate for t20. With the rise of Twenty20, an investigation of the D/L method applied to t20 is timely. Up until this point in time, such an investigation might not have been possible due to the dearth of t20 match results. Now analysts have at their disposal nearly 200 international matches, and through the use of efficient estimation procedures, the question may be at least partially addressed. Also, since t20 matches have a shorter duration, to date, few matches have been interrupted and resumed according to D/L. Consequently, if there is a problem with D/L applied to t20, it may not have yet manifested itself. This was true before the third editon of the World t20 in May 2010 when a controversial outcome occurred in a game between England and the West Indies. The criticism directed at the usage and appropriateness of the method by players, commentators and fans provide sufficient motivation to adjust the table in this project. In Section 2, the construction of the Duckworth/Lewis resource table is reviewed as well as its effective inception relative to past rain rules. Some comments are provided on aspects of the table and the limitations of the method. In Section 3, an alternative Twenty20 resource table is obtained using a non-parametric approach based on Gibbs sampling. The data used in the construction of the new table consist of all international Twenty20 matches to date involving Test-playing nations as recognised by the International Cricket Council (ICC). The project concludes with a short discussion in Section 4. A heat map is provided to facilitate comparisons between the two tables. 2. For their eyes only: Evaluation of the current method and its appropriateness A condensed version of the Duckworth/Lewis resource table (Standard Edition) is shown in Table 1 (taken from the ICC Playing Handbook 2008-09). In an uninterrupted innings of one-day cricket, a team starts batting with maximum resources available, equivalent to 50 overs and zero wickets taken. Reflect now on a one-day match where Team 1 scores 276 runs at the end of its 50 overs, as a simple example of the use of the Duckworth/Lewis resource table. Before Team 2 has a chance to start their chase of Team 1s total, it rains and they only receive 30 overs for their innings. A look at the resource table shows that Team 2 has only 75.1% of their resources in hand and, consequently, their target for winning the match is set at 276(0.751)=208 runs. Contrast the Duckworth/Lewis target with the unreasonably low target of 276(30/50)=166 runs based on run rates. Table 1. Abbreviated version of the Duckworth-Lewis resource table (Standard Edition) Overs available Wickets lost 0 1 2 3 4 5 6 7 8 50 100.0 93.4 85.1 74.9 62.7 49.0 34.9 22.0 11.9 40 89.3 84.2 77.8 69.6 59.5 47.6 34.6 22.0 11.9 30 75.1 71.8 67.3 61.6 54.1 44.7 33.6 21.8 11.9 25 66.5 63.9 60.5 56.0 50.0 42.2 32.6 21.6 11.9 20 56.6 54.8 52.4 49.1 44.6 38.6 30.8 21.2 11.9 10 32.1 31.6 30.8 29.8 28.3 26.1 22.8 17.9 11.4 5 17.2 17.0 16.8 16.5 16.1 15.4 14.3 12.5 9.4 1 3.6 3.6 3.6 3.6 3.6 3.5 3.5 3.4 3.2 0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 The table entries indicate the percentage of resources remaining in a match with the specified number of wickets lost and overs available. The D/L method has several advantages, which make it undoubtedly preferable to all previously used retargeting rules: completeness (it is able to handle all kinds of interruptions, even multiple interruptions and other unusual situations); the underlying mathematical model is internally consistent; tables are easily accessible/the computer programme is user-friendly; and the method compared to previous rules preserves the chance of winning by providing a relatively realistic reset target. Duckworth and Lewis (1998) only make available incomplete information relating to the creation of the resource table. Nevertheless, they do reveal that the table entries are based on the estimation of the 20 parameters Z0(w) and b(w), w=0, †¦, 9 corresponding to the function where Z(u,w) is the average total score obtained in u overs in an unlimited overs match where w wickets have been taken. While the utility of the Duckworth/Lewis table in one-day cricket cannot be questioned, a number of questions arise based on (1) and the estimates found in Table 1: Is (1) the best curve when considering that there are several parametric curves that could be fit? Is there any benefit in using a non-parametric fit to derive the table entries? The function (1) refers to unlimited overs cricket but is formed from a basis of one-day rules. Since one-day cricket is limited overs cricket, is there an advantage in taking the structure of the one-day game into account? How are the parameters estimated? If the 10 curves corresponding to w=0, †¦, 9 are fit separately, there are little data available beyond u=30 for fitting the curve with w=9. Also, the asymptotes for the curves with w=0,1,2 (see Figure 1 of Duckworth and Lewis (1998)) fall beyond the range of the data. In Table 1, the last two columns have many identical entries going down the columns. Although very few matches occur under these conditions, is it really sensible for resources to remain constant as the available overs decrease? This is a consequence of the asymptote imposed by (1). Although the D/L method maintains the margin of victory, it does not preserve the probability of victory. The resource table employed by the D/L method, and throughout its several updates, is based on detailed information from a large number of first innings scoring patterns. Therefore, the method assumes that the expected proportion of overall scoring for a particular over when a given number of wickets have been lost is the same in both innings. The validity of this assumption (that scoring patterns are the same in both innings) can be questioned. It has been found that there are a greater relative proportion of runs scored in the early and late overs of second innings, than in the first innings. The rule assumes that run-scoring accelerates right from the beginning of the innings so that runs come at a faster rate for every over completed; an exponential relationship between runs and overs is assumed. Although this captures the fact that run-scoring accelerates at the end of an innings, the moment of stabilisation somewhere after the relaxing of fielding restrictions is overlooked. 50 overs has been the standard format for a One-day International (ODI) for so long (over 20 years) that there is a period between the end of the fifteenth over and the start of the 41st where the batting side keep the scorecard ticking over through nudged and nurdled singles whilst the fielding side are perfectly happy to concede. Furthermore, no consideration is given to powerplay overs in which fielding restrictions are in place. Losing two overs during a period of fielding restrictions reduces a teams resources more than when a team loses the same couple of overs somewhere between, say, overs 25 and 30. The D/L method does not reflect the fact that the first period has a much higher run-scoring capacity than the second. The asymmetry between the equations for resetting targets impairs the quality of impartiality and may even lead to strategic options which are not equally open to both teams. When the target is large and Team 2 forsees a substantial reduction of its innings, Team 2 could take the strategic option to keep as many wickets as possible in hand, even if the scoring rate is less than required: a score of 99/1 (or 110/2, 123/3†¦) after 25 overs in the second innings against a target of 286 for 50 overs would win if no further play is possible. This distorted result is not merely due to the scaling of limited early data but also stems from an idealised assumption of how batting sides deploy their resources during an innings. The D/L method, like other (target) prediction algorithms, tries to fit historical data into a function curve, and uses this to predict future match states. Although this approach is generic and scales well, the specificity of the match is lost. For example, say in two instances a match is interrupted in the first innings with the score at 100/3 after 25 overs. The prediction (extrapolation) for both the matches will be the same. However, if one of the teams were 90/0 after 15 overs and the other team were 40/3 at the same stage, it is highly probable that the second team would have gone on to score more than the first. 3. Turn the tables: A new model for Twenty20 matches For ease of discussion, it is convenient to convert the Duckworth/Lewis resource table to the context of Twenty20; the resource table is shortened to 20 overs and the entries scaled so that an innings beginning with 20 overs and zero wickets corresponds to 100% resources. Table 2 gives the full Duckworth/Lewis resource table (Standard Edition) for Twenty20 where the entries are obtained by dividing the corresponding entry in Table 1 by 0.566 (the resources remaining in a 1-day match where 20 overs are available and zero wickets taken). Table 2. The Duckworth/Lewis resource table (Standard Edition) scaled for Twenty20 Overs available Wickets lost 0 1 2 3 4 5 6 7 8 20 100.0 96.8 92.6 86.7 78.8 68.2 54.4 37.5 21.3 19 96.1 93.3 89.2 83.9 76.7 66.6 53.5 37.3 21.0 18 92.2 89.6 85.9 81.1 74.2 65.0 52.7 36.9 21.0 17 88.2 85.7 82.5 77.9 71.7 63.3 51.6 36.6 21.0 16 84.1 81.8 79.0 74.7 69.1 61.3 50.4 36.2 20.8 15 79.9 77.9 75.3 71.6 66.4 59.2 49.1 35.7 20.8 14 75.4 73.7 71.4 68.0 63.4 56.9 47.7 35.2 20.8 13 71.0 69.4 67.3 64.5 60.4 54.4 46.1 34.5 20.7 12 66.4 65.0 63.3 60.6 57.1 51.9 44.3 33.6 20.5 11 61.7 60.4 59.0 56.7 53.7 49.1 42.4 32.7 20.3 10 56.7 55.8 54.4 52.7 50.0 46.1 40.3 31.6 20.1 9 51.8 51.1 49.8 48.4 46.1 42.8 37.8 30.2 19.8 8 46.6 45.9 45.1 43.8 42.0 39.4 35.2 28.6 19.3 7 41.3 40.8 40.1 39.2 37.8 35.5 32.2 26.9 18.6 6 35.9 35.5 35.0 34.3 33.2 31.4 29.0 24.6 17.8 5 30.4 30.0 29.7 29.2 28.4 27.2 25.3 22.1 16.6 4 24.6 24.4 24.2 23.9 23.3 22.4 21.2 18.9 14.8 3 18.7 18.6 18.4 18.2 18.0 17.5 16.8 15.4 12.7 2 12.7 12.5 12.5 12.4 12.4 12.0 11.7 11.0 9.7 1 6.4 6.4 6.4 6.4 6.4 6.2 6.2 6.0 5.7 The table entries indicate the percentage of resources remaining in a match with the specified number of wickets lost and overs available. To build a resource table for Twenty20 (t20), it is imperative to consider the scoring patterns specific to the shortest version of the game. Hence, consider the 141 international t20 matches involving ICC full member teams that have taken place from the first in 17 February 2005 through to 14 January 2011 (details of these matches can be accessed from ESPN Cricinfo). The shortened matches where the Duckworth/Lewis method was present have been excluded along with the t20 matches involving non-test playing nations (ICC Associates); the latter disqualification is in place to ensure matches are of a consistently high standard. Since scoring patterns in the second innings show a level of dependency to the number of runs scored by Team 1, consider first innings data only in the examination of t20 scoring patterns. Note that in their development of a simulator for one-day cricket match results, Swartz et al (2009) consider batting behaviour in the second innings. Match summary results are obtainable from ESPN Cricinfos statistics website but this study calls for ball-by-ball data. For this, Stephen Lynch (statistician) took pains to compose the associated commentary log for each match and store the data in a tabular form for easy access. For each match, define z(u,w(u)) as the runs scored from the point in the first innings where u overs remain and w(u) wickets have been taken until the conclusion of Team 1s innings. Calculate z(u,w(u)) for all values of u that occur in the first innings for each match beginning with u=20 and w(u)=w(20)=0. Next calculate the matrix T=(tuw) where tuw is the estimated percentage of resources remaining when u overs are available and w wickets have been taken. Calculate (100%) tuw by averaging z(u,w(u)) over all matches where w(u)=w and dividing by the average of z(20, 0) over all matches; the denominator is the average score by a side batting first in a t20 match. In the case of u=0, set tuw=t0w=0.0%. Table 3 displays the matrix T, an initial attempt at a resource table for t20. Note that t20,0=100% as desired. Although T is a non-parametric estimate of resources and makes no assumptions concerning the scoring patterns in t20, it is less than ideal. First, there are many table entries where there are missing data for the given situation. In addition, Table 3 does not exhibit the monotonicity expected. Logically, there is a requirement for a resource table that is non-decreasing from left to right along rows and a requirement for a resource table that is non-decreasing down columns. Also o bserve some conspicuous entries in Table 3, particularly the entry of 110.2% resources corresponding to 19 overs available and two wickets taken. This entry is clearly misleading and should be less than 100%. It arises due to the small sample size (three matches) corresponding to the given situation. For this non-parametric resource table (upcoming), the estimation procedure is robust to observations based on small sample sizes as the surrounding observations based on larger sample sizes have greater influence in the determination of the table. Therefore, there is retention of conspicuous observations such as 110.2%. This investigation of Duckworth/Lewis in Twenty20 should be viewed as one of discovery rather than an attempt to replace the Duckworth/Lewis table. Table 3. The matrix R=(r ow) of estimated resources for Twenty20 Overs available Wickets lost 0 1 2 3 4 5 6 7 8 20 100.0 19 93.6 83.0 110.2 18 90.4 85.8 78.3 17 86.7 80.5 82.8 53.7 16 81.7 74.5 81.9 70.7 32.8 15 76.5 71.4 71.5 65.9 59.9 14 68.3 69.1 67.6 66.2 58.4 13 63.8 68.2 62.4 62.9 59.0 24.3 12 62.1 62.3 60.6 57.3 58.8 44.1 11 60.5 56.3 57.0 53.6 61.0 39.7 10 57.6 49.6 52.1 52.8 48.1 38.6 41.0 35.2 9 54.9 52.1 43.6 49.0 44.1 33.8 35.0 29.7 8 51.0 46.4 41.7 42.2 41.2 36.7 27.5 28.7 7 48.6 45.8 38.9 35.9 39.1 34.8 24.1 25.5 6 54.0 37.9 36.6 30.3 36.2 31.3 20.9 21.4 26.7 5 44.0 32.5 25.4 28.7 29.4 23.9 17.1 14.9 4 28.2 23.4 22.5 22.2 20.9 14.3 10.6 3 20.6 19.9 16.9 17.8 15.8 12.4 7.6 2 21.2 17.6 11.9 13.4 10.6 11.0 7.2 1 8.7 5.2 7.3 6.0 5.5 6.0   The table entries indicate the percentage of resources remaining in a match with the specified number of wickets lost and overs available. Note: Missing entries correspond to match situations where data are unavailable. To impose the monotonicity constraints in the rows and columns, refer to the general problem of isotonic regression. For these purposes, consider the minimisation of with respect to the matrix Y=(yuw) where the double summation corresponds to u=1, †¦, 20 and w=0, †¦, 9, the quw are weights and the minimisation is subject to the constraints yuwgreater than or equal toyu,w+1 and yu,wgreater than or equal toyu−1,w. In addition, impose y20,0=100, y0,w=0 for w=0, †¦, 9 and yu,10=0 for u=1, †¦, 20. Although the fitting of Y is completely non-parametric, there are some arbitrary choices that have been made in the minimisation of (2). First, not only was the choice of squared error discrepancy in (2) convenient for computation, minimisation of the function F with squared error discrepancy corresponds to the method of constrained maximum likelihood estimation where the data ruw are independently normally distributed with means yuw and variances 1/quw. Second, a matrix Y: 20 10 based on overs is chosen. Alternatively, a larger matrix Y: 120 10 based on balls could have been considered. The overs formulation is preferred as it involves less missing data and leads to a less computationally intensive optimization. With a matrix Y based on overs, it is possible to interpolate on a ball-by-ball basis if required. Third, a simple choice has been made with respect to the weights quw. 1/quw is set equal to the sample variance used in the calculation of ruw divided by the sample size. The rationale is that when ruw is less variable, there is stronger belief that yuw should be close to ruw. Table 4 gives a non-parametric resource table based on the minimisation of (2). An algorithm for isotonic regression in two variables was first introduced by Dykstra and Robertson (1982). Fortran code was subsequently developed by Bril et al (1984). An R code implementation has been used that is available from the Iso package on the Cran website (www.cran.r-project.org). The programme requires 27 iterations to achieve convergence. What is unsatisfactory about Table 4 is that it suffers from the same criticism that was directed at the Duckworth-Lewis resource table. There is a considerable number of adjacent entries in Table 4 that have the same value. Again, it is not sensible for resources to remain constant as available overs decrease or wickets increase. The problem is that in the minimization of (2), various fitted ys occur on the boundaries imposed by the monotonicity constraints. Table 4 is also unsatisfactory from the point of view that it is incomplete; missing values corresp ond to match situations where data are unavailable. To address the above criticisms, it is necessary take a slightly different approach to estimation. As previously mentioned, it can been seen that (2) arises from the normal likelihood Therefore, consider a Bayesian model where the unknown parameters in (3) are the ys. A flat default prior is assigned to the ys subject to the monotonicity constraints. It follows that the posterior density takes the form (3) and that Gibbs sampling can be carried out via sampling from the full conditional distributions subject to the local constraints on yuw in the given iteration of the algorithm. Sampling from (4) is easily carried out using a normal generator and rejection sampling according to the constraints. Although in statistical terminology, (3) takes a parametric form, the approach is referred to as non-parametric since no functional relationship is imposed on the ys. Table 4. A non-parametric resource table for Twenty20 based on isotonic regression Overs available Wicket lost 0 1 2 3 4 5 6 7 8 20 100.0 19 93.6 85.5 85.5 18 90.4 85.5 80.8 17 86.7 80.8 80.8 64.7 16 81.7 77.4 77.4 64.7 55.9 15 76.5 71.5 71.5 64.7 55.9 14 68.8 68.8 67.6 64.7 55.9 13 66.6 66.6 62.6 62.6 55.9 38.4 12 62.2 62.2 60.6 57.3 55.9 38.4 11 60.5 56.8 56.8 54.8 54.8 38.4 10 57.6 52.1 52.1 52.1 48.1 38.4 34.1 29.3 9 54.9 52.1 46.5 46.5 44.1 36.3 34.1 29.3 8 51.0 46.4 42.0 42.0 41.2 36.3 28.6 28.6 7 48.6 45.8 38.9 37.3 37.3 34.8 25.3 25.3 6 39.7 39.7 36.6 32.8 32.8 31.3 23.0 21.4 21.4 5 39.7 32.5 28.0 28.0 28.0 23.0 17.1 15.5 4 27.9 23.4 22.5 22.2 20.9 14.3 10.7 3 20.7 19.9 17.4 17.4 15.8 12.4 7.7 2 20.7 17.6 12.5 12.5 10.8 10.8 7.2 1 8.7 6.6 6.6 6.0 5.7 5.7 The table entries indicate the percentage of resources remaining in a match with the specified number of wickets lost and overs available. Missing entries correspond to match situations where data are unavailable. In Table 5, the estimated posterior means of the ys obtained through Gibbs sampling are given, and these provide an alternative resource table for t20. The computations pose no difficulties and the estimates stabilize after 50,000 iterations. For cases of missing data, the Duckworth/Lewis table entries are used to impute the missing rs. The imputation is in the spirit of a Bayesian approach where prior information is utilised. Unlike Table 4, Table 5 is a complete table. Also, there are no longer adjacent table entries with identical values and this is due to the sampling approach. Finally, it can be stated that the methodology allows the input of expert opinion. For example, suppose that there is expert consensus that a table entry yij ought to be tied down to a particular value a. To force this table entry, all that is required is to set rij=a and assign a sufficiently small standard deviation Unfortunately we are unable to provide accessible alternative text for this. If you requi re assistance to access this image, please contact [emailprotected] or the author Table 5. A non-parametric resource table for Twenty20 based on Gibbs sampling Overs available Wickets lost 0 1 2 3 4 5 6 7 8 20 100.0 96.9 93.0 87.9 81.3 72.2 59.9 44.8 29.7 19 95.6 90.9 87.7 83.0 76.9 68.3 56.5 42.0 27.2 18 91.7